Equipment Design Data
| Design Pressure(MPa): | 0.25Mpa | ||
| Working pressure(Mpa): | 0.25Mpa | ||
| Design Temperature(℃): | -19-200 | ||
| Working Temperature(℃): | -19-200 | ||
| High Voltage Test(KV): | 20 | ||
| Enamel Thickness(mm): | 0.8-2.0 | ||
| Application Medium: | It can withstand the corrosion of various concentrations of organic acids, inorganic acids, organic solvents and weak alkalis (except for hydrofluoric acid, fluoride ion-containing media, the phosphoric acid and strong alkali concentration is greater than 30%, and the temperature is greater than 180 degrees Celsius). Combination type: The heat exchanger is composed of head, bottom and condensation sheet. It contains series type, parallel type and series-parallel type(see drawing). | ||
Parameter list
| Type | Layer qty | Area(m2) | DN | D | B | -H | Weight | ||
| P0.5 | 1 | 1 | 610 | 450 | 175 | 650 | 160 | ||
| 2 | 1.5 | 740 | 205 | ||||||
| 3 | 2 | 830 | 250 | ||||||
| 4 | 2.5 | 920 | 295 | ||||||
| 5 | 3 | 1010 | 340 | ||||||
| 6 | 3.5 | 1100 | 385 | ||||||
| 7 | 4 | 1190 | 420 | ||||||
| 8 | 4.5 | 1280 | 465 | ||||||
| 9 | 5 | 1370 | 510 | ||||||
| 10 | 5.5 | 1460 | 555 | ||||||
| P1 | 3 | 4 | 870 | 650 | 220 | 910 | 470 | ||
| 4 | 5 | 1010 | 550 | ||||||
| 5 | 6 | 1110 | 630 | ||||||
| 6 | 7 | 1210 | 710 | ||||||
| 7 | 8 | 1310 | 780 | ||||||
| 8 | 9 | 1410 | 860 | ||||||
| 9 | 10 | 1510 | 940 | ||||||
| 10 | 11 | 1610 | 1020 | ||||||
| P2 | 4 | 10 | 1050 | 850 | 250 | 1120 | 751 | ||
| 5 | 12 | 1230 | 878 | ||||||
| 6 | 14 | 1340 | 1005 | ||||||
| 7 | 16 | 1450 | 1132 | ||||||
| 8 | 18 | 1560 | 1245 | ||||||
| 9 | 20 | 1670 | 1372 | ||||||
| 10 | 22 | 1780 | 1500 | ||||||
Nozzle list
| Symbol | DN | Service | |||||
| P0.5 | P1 | P2 | |||||
| a1 | DN100 | DN125 | DN125 | Hot fluid inlet | |||
| a2 | DN100 | DN125 | DN125 | Hot fluid outlet | |||
| b1/C1 | DN25 | DN32 | DN40 | Cooling water outlet | |||
| b2/C2 | DN25 | DN32 | DN40 | Cooling water inlet | |||
