I.Features of monoblock type glass lined reactor:

 

Advantage:

1. Monoblock glass-lined reactor is also called closed-type glass-lined reactor. The cover and body of the reactor are welded together. Therefore, the strength of the reactor itself is better, and it is less likely to be deformed.

2. The closed glass-lined reactor can have a smaller sealing surface and better sealing performance.

 

Disadvantages:

1. Because the reactor cover is small, it is impossible to install an anchor agitator. Therefore, the use of closed reactor is relatively not recommended for high viscosity materials.

2. Since the tank cover and the shell are directly welded together, when the reactor is damaged, it needs to be repaired as a whole, and the maintenance cost is higher.

 

Our equipment advantages:

1. Our glass-lined reactor adopts high-quality imported Czech enamel and strictly abides by the cold enamel process to ensure the strict compliance of materials and procedures in the manufacturing process.

2. After the equipment is produced, it undergoes strict size measurement, water pressure and air pressure test, and high voltage electric spark test to ensure that all equipment has no quality problems before leaving the factory.

3. The equipment uses high-quality accessories, stainless steel PTFE gaskets, galvanized anti-corrosion clips, nuts and bolts, and every detail is well done.

Equipment Design Data

	Shell
	Single Seal	Double Seal	Jacket
Design Pressure(MPa):	-0.1-0.4	-0.1-0.6	0.6
Working pressure(Mpa):	-0.1-0.4	-0.1-0.6	0.6
Design Temperature(℃):	-19-200	-19-200	200
Working Temperature(℃):	-19-180	-19-180	200
High Voltage Test(KV):	20
Enamel Thickness(mm):	0.8-2.0
Application Medium:	It can withstand the corrosion of various concentrations of organic acids, inorganic acids, organic solvents and weak alkalis (except for hydrofluoric acid, fluoride ion-containing media, the phosphoric acid and strong alkali concentration is greater than 30%, and the temperature is greater than 180 degrees Celsius).

Equipment Dimension Sheet

Nominal Capacity(L)	Actual Capacity(L)	Heat Exchange Area(m2)	Motor Power(Kw)	Main Dimension(mm)										Weight(Kg)
				D	D1	D2	D3	D4	H	H1	H2	H3	H0
F1000	1520	4.93	3	1200	1300	1488	---	---	1610	850	---	1154	3200	1151
F1500	1961	5.35	4	1300	1450	1622	500	---	1770	870	---	1276	3486	1465
F2000	2180	7.16	4	1300	1450	1622	500	---	2190	990	---	1276	3907	1778
F2500	3385	8.68	4	1600	1750	1981	600	---	2105	1140	195	1276	3937	2203
F3000	3811	8.61	5.5	1600	1750	1964	600	---	2325	1140	195	1316	4300	2629
F5000	5905	13.16	7.5	1750	1900	2170	600	---	2960	1200	195	1316	5000	3901
F6300	6866	16	7.5	1750	1900	2196	600	---	3345	1200	195	1475	5200	4349
F8000	9060	18.38	7.5	2000	2200	2502	800	---	3385	1440	200	1545	5360	6044
F10000	11674	21.35	11	2200	2400	2734	800	---	3628	1380	200	1770	5810	7427
F12500	13651	24.89	15	2200	2400	2734	800	---	4128	1500	200	1770	6330	8556
F16000	17463	29.48	18.5	2400	2600	---	800	1800	4421	1500	200	1865	6718	11178
F20000	21790	34.03	18.5	2600	2800	---	900	2000	4750	1500	210	1865	7026	13357
F30000	32520	43.85	22	3000	3200	---	900	2400	5356	---	210	2025	7816	17985

Nozzle Specifications

Nominal Capacity(L)	Manhole	Agitator	Sightglass&Lantern	Thermowell pocket		Spare	Spare	Spare	Spare	Discharge	Inlet	Inlet	Outlet	Steam Inlet	Pressure guage	Vent
	M	e	S1,S2	T1	T2	a	b	c	d	f	n1-2	n3	n4	L1-3	P	g
F1000	300X400	125	100	100	---	100	125	100	---	100	---	---	---	32	---	G3/4"
F1500	300X400	125	125	100	---	100	125	100	---	100	50	---	---	40	---	G3/4"
F2000	300X400	125	125	100	---	100	125	100	---	100	50	---	---	40	---	G3/4"
F2500	300X400	125	125	100	---	100	125	100	---	125	65	---	---	50	---	G3/4"
F3000	300X400	150	125	100	---	100	125	100	---	125	65	---	---	65	---	G3/4"
F5000	300X400	150	125	125	---	125	150	150	---	125	65	65	---	65	---	G3/4"
F6300	300X400	150	125	125	---	125	150	150	---	125	65	65	---	65	---	G3/4"
F8000	300X400	200	125	150	---	150	150	150	150	125	80	80	---	80	---	G3/4"
F10000	300X400	200	125	150	150	150	150	150	150	150	80	80	80	80	---	G3/4"
F12500	300X400	200	125	150	150	150	150	150	150	150	80	80	80	80	---	G3/4"
F16000	450	200	125	150	150	150	150	150	150	150	100	100	100	100	---	G3/4"
F20000	450	200	125	200	250	250	200	200	200	150	100	100	100	100	---	G3/4"
F30000	450	200	125	200	200	150	150	150	150	150	100	100	100	100	125	G3/4"